How to move the garage yourself without a crane

Pin
Send
Share
Send

In this review, the author shares his advice on how to do it yourself, without using a crane, to move a small building to another place: a bathhouse, a change house or a garage.

In this case, the author needs to move the temporary garage in order to build a permanent one in stone in its place.

First of all, the garage must be freed from rubbish. Nothing should interfere with its movement.

The author uses segments of a round metal pipe as a guide.

The main stages of work

First of all, using a jack, the author raises the corner of the garage so that you can stick the edge of the pipe.

Then the author lubricates the pipe with the WD-40 so that it glides better. After that, the author lifts the garage from the inside, using the same jack.

When the garage will be on the rails, the author tries to push it in the right direction.

At first there was an idea to do this with a jack, but as it turned out, using ordinary boards, work is much faster.

And then the author made another discovery for himself - with the help of a long piece of pipe or scrap, work is progressing not only faster, but also much easier.

When the garage "moved out" of the rails, the author had to lift it again to start the pipes. But with this method you can do without a crane.

Firstly, it is not always possible to order it. Secondly, this service is usually not cheap.

For details on how to move the garage or other building yourself with a jack, see the video.

Pin
Send
Share
Send

Watch the video: Setting a truss without a crane (March 2024).