Typically, a large number of empty plastic bottles accumulate in the country, which can be used with advantage in the household.
For example, stripes of different widths can be cut from empty PET bottles. They can be used in the country, in the garage or in a private house.
Of the basic materials for the manufacture of this homemade product you will need a steel bar, a piece of metal-plastic pipe and a razor blade.
As a base, the master uses a piece of plywood (you can also use chipboard). Then in the prepared base it is necessary to drill a hole - under the diameter of the steel bar.
The main stages of work
At the next stage, it will be necessary to cut the steel bar and a piece of tube to size. Then a thread is cut at the end of the bar. After that, the washers are put on and two nuts are screwed. A thread is also cut at the other end of the bar.
The hole in the base must be expanded so that the nut can be installed inside. And then a steel bar is screwed into it.
Next, a piece of a metal-plastic pipe is put on the rod. A “stand” for a razor blade is made of a wooden bar. The blade itself is fixed with 2 screws. Instead of a blade, you can use a piece of saw blade.
Details on how to make a simple device for cutting strips of PET bottles can be found in the video on our website.
