House

What is better to finish the exterior walls? When building or repairing a house, this question always arises. Facade flexible tile is a great option. It has many colors, is very durable and easy to install. Even alone it will not be difficult for you to revetment a facade. The author of the video tells how to simplify the alignment of the tiles so that the process goes even faster.

Furniture design is not only the art of creating a beautiful appearance. Ergonomics, convenience, and facilitating life are also important here. In this review, the author proposes to make a do-it-yourself simple sliding table on wheels, which can be placed next to the bed. It will be pleasant to have breakfast, watch a movie or even work without getting out of bed.

In this review, the author shows in detail how to make a bird feeder with his own hands using improvised materials (in this case, young chickens). As improvised materials, the master uses a small piece of slate and several pieces of board. Such a homemade feeder is suitable for small and large poultry.

In this review, the author offers the idea of ​​how to make a do-it-yourself device that is easy to manufacture, with which you can quickly and easily chop small chips. It is necessary for kindling boilers, stoves or fireplaces. For the manufacture of woodchip, a profile pipe of rectangular section 40 * 20 mm and an old file (even “bald”) will be required, as well as some other details.

To prevent small birds, as well as insects in the form of wasps and bees, from settling under the roof, it is necessary to close the ventilation gap. For this, the author suggests using a ventilation tape for the overhang of the roof, which is made of plastic. It can be bought at a hardware store. The length of one roll is 5 meters and the width is 10 cm.

In this review, the author shows a way to decorate the walls under the "burlap" with his own hands. The work is simple and not laborious, and the material itself is inexpensive. In general, you can try! First of all, primed primed putty walls. This will require a primer and a roller. After the putty dries, the author proceeds to knead the modeling mass.

On summer days, when there is unbearable heat outside the window, we only dream about one thing - cool! And if you don’t have an air conditioner at home or in the country, you can do it yourself with your own desktop “analogue”. Of course, the efficiency of such a homemade product is small, but to cool a small room, a mini "air conditioning" will work fine.

OSB plates are well-known and common material. But only recently it began to be used in fine finish and design. Even old darkened boards can be very interesting to decorate. Before starting all work, go over the stove with sandpaper and then remove the dust with a brush. Method 1 For tinting, a mahogany water-based stain is used.

Loft style is a brutal rough surface of metal, concrete or wood. And in this review, the author shows how to create an imitation of rusty iron using plaster. This texture looks very unusual and original, and can become a separate decoration of the interior. The first thing you need is a finishing putty.

If you approach the choice of a chandelier competently and with all responsibility, then before buying it you need to pay attention to five key points. In this review, the author talks in detail about the important criteria for choosing a chandelier for home and apartment. We recommend that you familiarize yourself with this information - it will not be superfluous. Power of the chandelier First of all, it is necessary to determine the power of lighting of the chandelier.

You can find many ways on the Internet how to quickly remove carbon deposits from the sole of the iron. However, you need to understand that there is no universal tool to solve this problem. This is due to the fact that, firstly, the soles of irons are different; secondly - soot itself can also be different. In this review, the author shares the most effective and simple ways how to quickly remove carbon deposits from the sole of the iron.

Wall cladding inside the house can be done using decorative tiles made of gypsum (alabaster). And you can make them yourself. It will cost much cheaper than buying similar tiles in the store. By the way, you can make 12 tiles in just 15-20 minutes. The first step is to prepare a gypsum solution.

Unlike brick ovens, a sauna stove-heater made of metal has more compact dimensions. This is very important, given the small area of ​​the steam room in the bath. In addition, there is no need to lay the foundation for it. In this review, the author shows how you can make a compact sauna heater with your own hands for a steam room.

In this review, the author shares his own idea of ​​how to make a simple universal bracket for fixing the TV to the wall using improvised materials. For the manufacture of a home-made bracket, profile pipes, pieces of a metal corner, and also steel plates will be required. The first step is to make a frame that attaches directly to the wall.

Using paint, you can not only give the walls a color, but also create many interesting patterns and ornaments. The author offers an idea how to make a realistic 3D drawing. This is a very quick and easy project that even beginners can handle. The first thing we need is to paint the wall in a dark gray color.

Most often, it is customary to wallpaper the walls. But painting has many advantages, because you have a greater scope of imagination and you can create a drawing yourself. Also, painted walls are easier to clean and cheaper to update. The author tells how to make a stylish natural pattern with your own hands. First of all, you need to make three stencils.

The imitation of paving stones on a concrete surface looks no worse than a factory paving slab (provided that all stages of the work will be performed efficiently). Among the main advantages of such a decorative coating is the durability and wear resistance. Also, weed grass does not germinate between the “tiles”, and there is no need to spend time on surface care.

Even thick leather belts tend to rub over time. If this occurs at a fold at the plaque, the belt is easily resuscitated. In this review, the author shows in detail how to properly restore the belt, preserving its strength and beautiful appearance. With a blade, spread the thread fastening the loop on the plaque.

So that during the construction of a 2 or 3-story private house, do not raise buckets of cement, sand and gravel by hand, to facilitate physical work, you can make a simple hoist from an electric drill and wooden blocks. In the store, the electric hoist of the simplest design costs about 5 thousand rubles.

Painting walls is an easy and inexpensive way to refresh your room. Such a coating is easy to wash, it does not fade, and also represents a large scope for creativity. Painting with the effect of decorative plaster is perfect for uneven walls. The texture will hide potholes and cracks. You do not even need to apply putty first.