House

In this review, the author offers an original idea for wall decor indoors. To do this, you need an elongated rubber tablecloth in the form of leaves and putty. To prepare the textured mixture, you will need cement putty and joiner's glue PVA diluted with water in a ratio of 1:10. As a result, a plastic mixture convenient for work is obtained.

In this review, we bring to your attention a cool idea for a house or apartment: a metal frame of a hall with shelves for shoes and for hats. It is also possible to install a mirror. The main material for the manufacture of halls is a profile pipe. For decorative elements, the master uses a square bar with a cross section of 10 * 10 mm.

Independently connect a two-gang switch in a house or apartment under the power of every man (however, at least basic knowledge about an electrician should be). You will learn how to do everything right in this article. The first step is to prepare the switch itself, lampholders and wires.

In this review, the author tells in detail how to work with the stencil correctly when applying decorative plaster on the wall indoors. In this case, the plaster itself is made of ordinary putty. The first step is to create a light texture on the surface of the wall. For this, the master uses acrylic putty.

From unnecessary scraps of metal-plastic (or, for example, polypropylene) pipes, which often remain after replacing the old water supply, you can make a compact and convenient clothes dryer with your own hands. The wife will appreciate such homemade work. The peculiarity of this dryer is that it is installed on a heating radiator, which allows drying clothes in the house and apartment in the winter.

Floor laminate is very often used for wall decoration indoors. Just the question arises: "What is better to stick it so that the panels do not fall off over time?" In this review, the author decided to conduct an experiment: which glue would better hold the laminate. The author took three different adhesives - this is ordinary silicone sealant, mounting adhesive and liquid nails.

Very often, the so-called aluminum caps are used to finish the “bare” ends of a tabletop or furniture. However, not everyone likes them. Many believe that they spoil the appearance of the product. Therefore, for decorative decoration of the ends, you can use another option - a plastic edge in the form of a strip.

From an old circular saw for circular, you can make a cool kitchen hatchet with your own hands. Moreover, the author in this case does not make the handle of wood, but of epoxy. It looks very original. A homemade kitchen hatchet can be used both for cutting vegetables and for chopping bones. Only a grinder and grinder will be needed from the tool.

One of the most common reasons why a Chinese concrete mixer breaks down is a malfunction of the bearing that holds the "pear" itself (the container in which the solution is mixed). If you solve this problem, then the concrete mixer will serve at least 10 times more. To do this, you need to make a homemade device.

In this review, the author shares the original idea of ​​how, with your own hands, using a minimum of tools, you can make a portable cutting table with a deep metal tray (the tray itself is purchased). Sliced ​​vegetables and other products can be immediately “swept” with a knife into the drawer tray, which is very convenient. A cutting table is made of wood (preferably hardwood).

Old freon cylinders, as well as propane ones, are widely demanded among master-craftsmen. Someone makes a mini barbecue out of them, others - portable receivers. In this review, the author shows how to make a bin out of an empty freon bottle. It is built into the kitchen cabinet. A design feature is that when you open the cabinet door, the lid of the bin rises, and when closed, it falls.

Young children are very mobile, and it is not always possible to keep track of them. However, in this case, for safety reasons, you can use special children's furniture. And to make it under the force of every man. In this review, the author shares an interesting idea on how to make a safe chair for a small child so that he can stand at the table during a meal.

Homemade magnetic holder for kitchen knives is mounted directly on the wall and is a wooden plank with neodymium magnets inside. This is a great alternative to stand decks. The main advantage of the wall holder is practicality - knives are always at hand, and at the same time you can save a little space on the table or in the drawer.

When you need to chop a large amount of onions or other vegetables - this is a whole hassle. But there is a solution to this problem. The author suggests making a simple vegetable cutter from kitchen knives and a reducer. A battery is used as a power source. The author himself decided to make the vegetable cutter disk out of a round cutting board (wooden).

For more convenient storage of batteries, so as not to look for them in the boxes when they are needed, the author suggests making a simple device with your own hands. In this review, we will focus on a homemade dispenser with a shelf that can be hung on the wall in the right place. As the main material for the manufacture of this design, the author uses wood and plexiglass.

To create an original decorative plaster on the wall inside the living room (in the living room or bedroom), you can use a lace tablecloth. It turns out very unusual and stylish. First of all, it is necessary to prepare the basis for applying the starting gypsum putty. To do this, we process the wall with a deep penetration primer.

Sliding doors are very popular today - it is cheap, practical and beautiful. In addition, they are very simple to make on their own. First of all, you need to saw the workpiece of the desired length from the board or plywood. Then they will need to be trimmed. The author uses a circular saw and a miter saw for this.

It often happens that the necessary things (which we take with us when leaving the house) are scattered in different places. To solve this problem, the author proposes to make a simple wall-mounted organizer with a magnetic key holder. As the main material, you can use plywood or boards (you can even glue boards from the remnants of lumber).

From the remnants of the lumber, you can make an original decor - a wooden mosaic for finishing the surface of the wall. The process of making a wall mosaic of wood is very simple. And in time it is not very expensive. First of all, it will be necessary to cut square billets from a piece of wood on a miter saw (or circular).

Sometimes you have to side by side with very noisy neighbors and endure their antics until late at night. However, you can make them a "pleasant surprise." Surely, in the early morning the neighbors will appreciate it. The author himself calls his creation a "woodpecker." Such a name fully justifies its functional purpose, and the shape of the homemade product really looks like a woodpecker.