In this review, the author shows how to make a textured pimpled surface on a tree. These pimples also have a massage effect.
The technology itself is quite simple, but, of course, like everything new, requires some refinement.
So, first of all, cut off a piece of the board of the desired size. The author uses a squared bar.
Then it will be necessary to make diagonal marking on the bar. See the photo below.
We recommend reading: a cool serving board made of wood and epoxy.
The main stages of work
At the next stage, small depressions will need to be made at the intersections of the lines.
After this recess, you need to make a larger size. To do this, you can use a steel round bar of suitable diameter. We make one edge in the form of a hemisphere.
Then, using a grinding machine, the author removes the upper layers of the tree. As a result, only barely noticeable points should remain from the recesses.
On the workpiece you need to put a piece of damp cloth, and then iron the surface with an iron. At the same time, the author also uses the steam effect (this function is in any modern iron).
As a result, neat pimples appear on the surface of the tree.
For details on how to make a textured pimpled surface on a tree, see the video on the site.
