It is really not always easy to equip a motor home really at home and as comfortable as possible.
For example, ordinary pots with plants can break or fall, shaking will damage fragile leaves.
But unpretentious succulents will well survive the difficulties on the road.
The author presents an original idea of how to make a reliable planter for a trailer from a PVC pipe.
However, this idea can be used for an ordinary house or summer house.
The main stages of work
First of all, prepare a piece of pipe of the required length and pots.
The edges of the pipe must be closed with plugs, after applying rubber glue to them. In the process, mark the location of the pots.
Pre-drill holes with a thin drill, and only then proceed to the circular saw.
It is better to first make two holes at the edges, and then once again clarify the measurements so that the pots are located at the same distance from each other. Next, sand the edges of the cut.
Now, holders should be made from narrow pipe scraps. Cut a few centimeters from them so that the future planter can be reliably installed.
The edges can be smoothed out with large sandpaper to get a soft rounding.
Now you can paint our planters. To do this, it is best to use an aerosol can.
So the paint will lay an even texture on the entire surface, without leaving smears or smudges. The main thing is to apply a thin layer.
At the last stage, it remains only to plant unpretentious aloe, echeveria or euphorbia in pots.
Attach the holders to the wall, insert the pots into them and you're done. This design will definitely not break and will not fall on sharp turns, pleasing the eye of passengers.
Details on how to make a bright planter made of PVC pipe, you can watch the video.
