With the help of a homemade universal nozzle for a washing gun, you can wash the underbody of the car and the concrete coating (asphalt) on the street and in the garage without any problems. You can make such a nozzle from a profile pipe.
Also for the manufacture of this device will require five nozzles, a piece of round steel pipe, a pair of plugs from a metal plate.
First of all, the author cuts a 20 * 20 mm section of a profile pipe that is suitable for the length and drills six holes in it: five on one side and one on the other (in the center of the profile).
The main stages of work
At the next stage, the author welds 5 nozzles for spraying water to the profile pipe. If necessary, their number can be large (this is at your discretion).
At the ends of the profile pipe, it is necessary to weld the plugs from the plate. Then the author welds two swivel wheels, which are used in the manufacture of furniture.
Next, it will be necessary to weld a piece of steel round pipe to the profile, having previously cut one edge at an angle of 45 degrees. An adapter is welded to the other end of the pipe so that a washing gun can be connected.
For details on how to make a simple universal nozzle for a washing gun with your own hands, see the video on our website.
