It is far from always possible to cope with the blockage that forms in the siphon or pipe under the sink in the kitchen. In general, as practice shows, it is much easier to prevent a blockage than to eliminate it.
And especially for the prevention of blockages, the author recommends using a food waste shredder. This device is installed directly under the sink, it works from the network.
However, please note that for mounting the chopper, the diameter of the drain hole in the sink itself must be at least 90 mm.
If you have installed a kitchen sink with a drain hole of a smaller diameter, then nothing will work. There is only one way out in this situation - you need to replace the old sink with a new one, with a drain hole suitable for the diameter.
Design features of the grinder for washing
This device has a working chamber, inside of which there is a mechanism for grinding food waste. Due to this, the sewer pipe does not clog, because instead of large food debris, a homogeneous crushed mass enters it.
Before you begin installing this device, you will need to disassemble the entire assembly. To do this, loosen the fasteners, and then disconnect the circlip from the flange of the kitchen sink.
Food Waste Grinder Installation
At the next stage, the assembly of the assembly is carried out directly into the sink itself. This is done simply, in accordance with the instructions that came with the device.
For details on how to install and connect a food waste chopper (disposer) for washing, see the video on our website.
