A SAFE WAY TO PLACE A BABY SWING

Send

Many children dream of a home children's swing. And parents seem to be ready to purchase this funny toy, but because of the lack of knowledge of where to place it, they do not dare to make their childhood dreams a reality. But the swing is not easy fun, and the sea of positive emotions for your child. Consider a simple, inexpensive and reliable method of installing a children's home toy.
Where will we post it?
If the door door is mounted correctly, then it will be a reliable support that will ideally fit into the interior of the room.

To achieve maximum amplitude on a swing, it is enough to have a distance between the lute and furniture of at least 1.2 meters. Therefore, it is necessary to choose from possible doorways the one where the specified size will be provided.
Tools and materials.
To install you will need:
- An anchor metal ring with a screw thread with a diameter of 8 mm, a length of 80 mm in an amount of 2 pieces;
- carabiner with 60 mm long rope fixation - 2 pieces;
- rope for mountaineering withstanding dynamic loads with a diameter of 8 mm - 5 meters;
- drill with a diameter of 4 - 5 mm;
- washers with an inner diameter of 8 - 10 mm and an outer diameter of 20 mm - 4 pcs .;
- drill.
Assembly sequence.
The center is marked on the selected upper jumper of the piece along its length and width. A length of 200 mm (total size 400 mm) is laid off from it to the right and left side. At the extreme points of the line, holes are drilled with a diameter of 4 mm to a depth of 25 mm. If the loot is made of hardwood, then it is drilled with a 5 mm drill. Rings with an anchor are screwed into the formed holes to the same depth within 25 - 35 mm. In the final position, the rings are placed parallel to each other with holes.

We determine at what height the swing will be installed. Usually this value is 1.2 - 1.4 m. 2 slings are cut from the rope with dimensions twice as large as the set height. The end of the rope winds into the mounting hole. A puck is mounted on it, and the extreme part is fixed by a knot.

This is the fastening of the other ends of the rope. A carabiner is inserted on the fixed left and right slings.
To avoid skewing the system, a knot is made in the upper part of the sling, which will abut from the back of the toy into a carbine.

The toy is assembled. Now for its operation it is enough to fix the carbines in the rings of the loot. Advantage of the method provided:
- quickly and easily assembled into position;
- the design has three degrees of freedom (moves in the longitudinal, lateral and circular directions);
- convenient to use.
Disadvantages:
- as a result of friction of the moving metal parts of the ring and carbine, a creaky sound is produced (with periodic lubrication of the rubbing units, this remark disappears).

Send