In this review, the author wants to share the idea of how to make the most common Yamobur for a summer house, but not a screwdriver or drill, but a walk-behind tractor with a cultivator (that is, in this case we are talking about a gasoline drive).
With the help of a homemade Yamobur for a summer residence, it will not be any problem to drill holes for planting plants or seeds of vegetables. Depth - no more than 15-20 cm. Deep holes cannot be drilled in this way.
First of all, it will be necessary to remove the outer sleeve with cutting knives, which is located on the motor-block shaft.
The main stages of work
In the next step, it will be necessary to weld a bolt of suitable diameter to the sleeve. The weld must then be cleaned with a grinder (angle grinder) with a flap wheel (or you can use a drill).
Next, the author puts the sleeve with cutting knives and a bolt back onto the shaft. He painted the pre-polished metal with spray paint. The chuck from the drill is screwed onto the bolt.
After this, it is necessary to cut the saw blade into the tree in half, and weld the halves at an angle to a piece of pipe or metal bar. Then the "nozzle" is inserted into the drill chuck.
Information on how to make a hand drill with your own hands, which is useful in the country house and in a private house, you can find in this review.
For details on how to make a country Yamobur from a saw blade with a gasoline drive, see this video.
